 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STH12NA60/FI STW12NA60 N - CHANNEL ENHANCEMENT MODE FAST POWER MOS TRANSISTOR TYPE STH12NA60 STH12NA60FI STW12NA60 s s s s s s s V DSS 600 V 600 V 600 V R DS( on) < 0.6 < 0.6 < 0.6 ID 12 A 7A 12 A TO-247 TYPICAL RDS(on) = 0.44 30V GATE TO SOURCE VOLTAGE RATING 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT 100oC LOW INTRINSIC CAPACITANCES GATE GHARGE MINIMIZED REDUCED THRESHOLD VOLTAGE SPREAD TO-218 1 3 2 1 3 3 2 DESCRIPTION This series of POWER MOSFETS represents the most advanced high voltage technology. The optimized cell layout coupled with a new proprietary edge termination concur to give the device low RDS(on) and gate charge, unequalled ruggedness and superior switching performance. APPLICATIONS HIGH CURRENT, HIGH SPEED SWITCHING s SWITCH MODE POWER SUPPLIES (SMPS) s DC-AC CONVERTERS FOR WELDING EQUIPMENT AND UNINTERRUPTIBLE POWER SUPPLIES AND MOTOR DRIVE s 2 ISOWATT218 1 INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value STH/STW12NA60 VD S V DG R V GS ID ID ID M(*) P tot V ISO T stg Tj Drain-source Voltage (V GS = 0) Drain- gate Voltage (R GS = 20 k) Gate-source Voltage Drain Current (continuous) at T c = 25 C Drain Current (continuous) at T c = 100 oC Drain Current (pulsed) Total Dissipation at Tc = 25 C Derating Factor Insulation Withstand Voltage (DC) Storage Temperature Max. Operating Junction Temperature o o Unit STH12NA60FI V V V 7 4.4 48 80 0.64 4000 A A A W W/o C V o o 600 600 30 12 7.6 48 190 1.52 -65 to 150 150 C C (*) Pulse width limited by safe operating area November 1996 1/11 STH12NA60/FI - STW12NA60 THERMAL DATA TO-218/TO-247 ISOWATT218 R thj-cas e Rthj- amb Rt hc- sin k Tl Thermal Resistance Junction-case Max 0.66 30 0.1 300 1.56 o o o C/W C/W C/W o C Thermal Resistance Junction-ambient Max Thermal Resistance Case-sink Typ Maximum Lead Temperature For Soldering Purpose AVALANCHE CHARACTERISTICS Symbol IA R E AS E AR IA R Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by T j max, < 1%) Single Pulse Avalanche Energy (starting T j = 25 o C, ID = I AR, VD D = 50 V) Repetitive Avalanche Energy (pulse width limited by T j max, < 1%) Avalanche Current, Repetitive or Not-Repetitive (T c = 100 o C, pulse width limited by T j max, < 1%) o Max Value 12 700 28 7.6 Unit A mJ mJ A ELECTRICAL CHARACTERISTICS (Tcase = 25 C unless otherwise specified) OFF Symbol V( BR)DSS I DS S IG SS Parameter Drain-source Breakdown Voltage Test Conditions I D = 250 A VG S = 0 Min. 600 25 250 100 Typ. Max. Unit V A A nA Zero Gate Voltage V DS = Max Rating Drain Current (V GS = 0) V DS = Max Rating x 0.8 Gate-body Leakage Current (V D S = 0) V GS = 30 V T c = 125 oC ON () Symbol V G S(th) R DS( on) I D( on) Parameter Gate Threshold Voltage V DS = V GS Static Drain-source On Resistance On State Drain Current V GS = 10V Test Conditions ID = 250 A ID = 6 A 12 Min. 2.25 Typ. 3 0.44 Max. 3.75 0.6 Unit V A V DS > ID( on) x RD S(on) max V GS = 10 V DYNAMIC Symbol gfs () C iss C oss C rss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions V DS > ID( on) x RD S(on) max V DS = 25 V f = 1 MHz ID = 6 A VG S = 0 Min. 8 Typ. 12 2500 310 85 3250 410 110 Max. Unit S pF pF pF 2/11 STH12NA60/FI - STW12NA60 ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol t d(on) tr (di/dt) on Parameter Turn-on Time Rise Time Turn-on Current Slope Test Conditions V DD = 300 V I D = 6 A V GS = 10 V R G = 4.7 (see test circuit, figure 3) V DD = 480 V I D = 12 A VGS = 10 V R G = 47 (see test circuit, figure 5) V DD = 480 V ID = 12 A VG S = 10 V Min. Typ. 25 35 190 Max. 35 50 Unit ns ns A/s Qg Q gs Q gd Total Gate Charge Gate-Source Charge Gate-Drain Charge 110 15 47 150 nC nC nC SWITCHING OFF Symbol t r(Vof f) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions V DD = 480 V ID = 12 A V GS = 10 V R G = 4.7 (see test circuit, figure 5) Min. Typ. 35 20 57 Max. 50 30 80 Unit ns ns ns SOURCE DRAIN DIODE Symbol IS D I SDM(*) V S D () t rr Q rr I RRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 12 A VG S = 0 670 12.7 38 I SD = 12 A di/dt = 100 A/s V DD = 100 V T j = 150 o C (see test circuit, figure 5) Test Conditions Min. Typ. Max. 12 48 1.6 Unit A A V ns C A () Pulsed: Pulse duration = 300 s, duty cycle 1.5 % (*) Pulse width limited by safe operating area Safe Operating Areas For TO-218 and TO-247 Safe Operating Areas For ISOWATT218 3/11 STH12NA60/FI - STW12NA60 Thermal Impedeance For TO-218 and TO-247 Thermal Impedance For ISOWATT218 Derating Curve For TO-218 and TO-247 Derating Curve For ISOWATT218 Output Characteristics Transfer Characteristics 4/11 STH12NA60/FI - STW12NA60 Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations Normalized Gate Threshold Voltage vs Temperature Normalized On Resistance vs Temperature 5/11 STH12NA60/FI - STW12NA60 Turn-on Current Slope Turn-off Drain-source Voltage Slope Cross-over Time Switching Safe Operating Area Accidental Overload Area Source-drain Diode Forward Characteristics 6/11 STH12NA60/FI - STW12NA60 Fig. 1: Unclamped Inductive Load Test Circuits Fig. 2: Unclamped Inductive Waveforms Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge Test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Reverse Recovery Time 7/11 STH12NA60/FI - STW12NA60 TO-247 MECHANICAL DATA mm MIN. A A1 A2 b b1 b2 C D e E L L1 Q OP 3.05 0.4 20.4 5.43 15.3 15.57 3.7 5.3 3.5 4.3 5.84 3.71 1.5 1 4.7 TYP. MAX. 5.3 2.87 2.5 1.4 2.25 3.43 0.8 21.18 5.47 15.95 0.120 0.015 0.803 0.213 0.602 0.613 0.145 0.208 0.137 0.169 0.230 0.146 0.059 0.039 MIN. 0.185 inch TYP. MAX. 0.208 0.113 0.098 0.055 0.088 0.135 0.031 0.833 0.215 0.628 DIM. A A2 D L Q L1 b1 A1 E 8/11 b2 e o b C STH12NA60/FI - STW12NA60 TO-218 (SOT-93) MECHANICAL DATA mm MIN. A C D E F G H L2 L3 L5 L6 R O - 4 3.95 31 12.2 4.1 - 0.157 0.5 1.1 10.8 14.7 - 18 4.15 0.155 1.220 0.480 0.161 4.7 1.17 2.5 0.78 1.3 11.1 15.2 16.2 0.019 0.043 0.425 0.578 - 0.708 0.163 TYP. MAX. 4.9 1.37 MIN. 0.185 0.046 0.098 0.030 0.051 0.437 0.598 0.637 inch TYP. MAX. 0.193 0.054 DIM. A C L5 L3 L2 L6 D E H O F R 1 2 3 P025A G 9/11 STH12NA60/FI - STW12NA60 ISOWATT218 MECHANICAL DATA DIM. MIN. A C D D1 E F G H L1 L2 L3 L4 L5 L6 M N U 5.35 3.3 2.9 1.88 0.45 1.05 10.8 15.8 20.8 19.1 22.8 40.5 4.85 20.25 3.5 2.1 4.6 mm TYP. MAX. 5.65 3.8 3.1 2.08 1 1.25 11.2 16.2 21.2 19.9 23.6 42.5 5.25 20.75 3.7 2.3 MIN. 0.210 0.130 0.114 0.074 0.017 0.041 0.425 0.622 0.818 0.752 0.897 1.594 0.190 0.797 0.137 0.082 0.181 inch TYP. MAX. 0.222 0.149 0.122 0.081 0.039 0.049 0.441 0.637 0.834 0.783 0.929 1.673 0.206 0.817 0.145 0.090 L3 N A E L2 L5 L6 F M U H 1 L1 L4 2 3 G D1 C D P025C 10/11 STH12NA60/FI - STW12NA60 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequ ences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical compone in life support devices or systems without express nts written approval of SGS-THOMSON Microelectonics. (c) 1996 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A . 11/11 |
Price & Availability of STW12NA60
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |